Knowing the color temperature of a light source is extremely important for consistently faithful color accuracy and reproduction in photography. Reproducing accurate color is critical in many areas of photography such as fashion and commercial product. Useful for both still and cine photography.

The KCM-3100's uncluttered control button layout and large easy-to-read LCD make using the meter much easier than other options on the market today.

The KCM-3100 has 3 display modes for diplaying color temperature. Each mode is designed for a certain type of photography or filtering system.

LB_(Light Balancing) LB_index is used to select the necessary amber or blue LB_filter. The Mired difference between the specific photographic color temperature for the selected film type and the light source.

CC (Color-Correction) displays the Kodak" filter number(s) of the necessary light-balancing filter(s) to make for easy selection of the required light balancing filter. Where as the LB system uses Amber or blue filters, the CC system uses Magenta or Green color compensating filters.

Photographic color temperature in degrees Kelvin. This is a useful setting to determine filtration based on the light source and the spectral sensitivity of the film used.

The ability to take ambient and flash light readings using either a sync cord or non-cord. Using a sync cord, the flash is fired when the reading button is pushed. In the non sync cord mode, pushing the reading button puts the meter in a stand-by mode and when the flash is fired the meter displays those readings.

"Analyzer Mode" for measurement of Flash lighting only. Setting the shutter speed to "F", the meter will only read light from flash.

9 memory channels for customizing the meter to your equipment and materials- All film and equipment manufacturers claim that their products are calibrated or balanced to "daylight" (5500K) or tungsten (3400K or 3200K), but in the real world these number are often not 100% accurate. Film can vary from batch to batch and light bulbs and flash tubes can have slight shifts in color over time. Once these differences are determined, The KCM-3100's 9 memory channels allow the photographer to enter custom setting based on the situations or individual film characteristics they are working with. Once the data is entered and stored, the meter will adjust future readings accordingly.

Type     Three-color hand-held digital color meter for color photography; Determines photographic color temperature of light sources and filtration required

Reception Method     Incident-light readings

Receptors     Incident- flat diffuser, Rotating receptor head 90º right/ 180º left

Receptor Elements     3 Silicon photocells filtered red, green, blue sensitivities

Measuring Modes     AMBI - Ambient light, CORD- Flash w/sync cord,

NON-CORD- Flash without sync cord

Measuring Range     Ambient light- EV 3.0 to 16.3,

Flash- F/2.8 to 180 in two ranges

Shutter Speed Setting     

Range (for Flash)     1/500 sec. to 1 sec. in 1-stop increments

Display     Liquid Crystal (LCD)

Display Ranges

    LB index: -500 to 500 mireds,

LB_filter No. 80A ~ 80D to 85D ~81EF

CC index: 200M to 200G

Operation Temp Range     14 to 122° F (-10 to 50&Mac176;)

Power     Two AA Alkaline dry-cell batteries

Dimensions     2.75 in (70mm) W x 6.7 in (170mm) H x 1.1 in. (28mm) D

Weight     6.0 oz. (200g) w/o battery

Standard Accessories     Neck strap, case