The MicroSync™ Digital is revolutionary because it is super miniature, extremely lightweight, and almost operates itself. Just place the transmitter in the hot shoe of your camera, plug the receiver into your strobe's power pack and fire! It's that easy.

Advanced Radio Frequency The MicroSync™ Digital uses advanced radio

frequency technology. Unlike infrared units, you don't need to have "line of sight" to fire your strobes - the MicroSync™ Digital will work through walls and around corners in most situations.

Automatic Power Management

The MicroSync™ Digital has a unique automatic power management system. There are no on/off switches on the transmitter or receiver. When you press the shutter, the transmitter turns itself on and sends the signal to the receiver to fire your lights.

Both units then turn themselves off - all in milliseconds! As a result, the battery life of the coin cell in the transmitter is anticipated to be 3 years. With the automatic power management system, you never have to worry about leaving the unit on and running down Your batteries.

4 Channels

There are four channels on the MicroSync™ Digital to allow you to shoot without interference from other MicroSync™ users in close proximity.

Wireless Radio Strobe Sync System

The MicroSync™ Digital is the smallest, smartest wireless solution for remotely firing strobes and most SLR cameras.

The Freedom of Wireless Whether you're shooting in the studio or on location, firing your strobes with a sync cord can be impractical, inconvenient, and sometimes even impossible. Not any more!

The MicroSync™ Digital allows you to fire strobes wirelessly. Now you can liberate yourself from the limitations of your sync cord.

Other Brands

Fire an SLR camera

The MicroSync™ Digital can be used to remotely fire most SLR cameras that have an electronic cable release input. To do this, you will need a camera firing cord for your SLR. MicroSync™ camera firing cords are available for most Canon, Nikon and Pentax digital and film SLRs.